Product Description:
YJJ MF5806E1 Flow Sensor Is Used In Medical Oxygen Supply Systems
Features:
MF5806E1 flow sensor is a dedicated MEMS flow sensing chip for medical oxygen inhalation devices. It is mainly used in medical central oxygen supply systems, emergency oxygen supply, and oxygen inhalation scenarios such as operating rooms and intensive care units. Here is the core parameter and usage description of it:
Core parameters
Sensor type: MEMS flow sensing chip
Application fields: Medical oxygen inhalers (such as MF5806 series)
Applicable scenarios: Operating rooms, intensive care units, emergency centers, respiratory departments, etc.
Measurement range: Needs to be combined with specific models (such as the MF5806 series supports gas mass flow monitoring)
Usage description
Medical oxygen supply monitoring: Real-time monitoring of oxygen flow to ensure oxygen supply safety
Emergency equipment: Used for rapid adjustment of oxygen inhalation volume during emergencies
Precise control: Suitable for medical scenarios with high requirements for flow accuracy
This sensor achieves high precision and miniaturization through integrated MEMS technology, meeting the stability and reliability requirements of medical equipment.
The MF5806E1 flow sensor is one of the electromagnetic flowmeters produced by Mecanica Sistemas S.A. The following is the description of its key parameters:
Measurement accuracy
Standard accuracy: ±0.5%
Low flow rate characteristic: Suitable for low flow rate conditions, with high stability
Medium requirements
Electrical conductivity: ≥ 5 μs/cm for liquids (such as water, sewage, acid-base solutions, etc.)
Bore range
Integrated/Discrete type: DN10 - DN500mm
Electrode material
Optional materials: 316L stainless steel, titanium, tantalum, tungsten carbide (WC), platinum iridium (Pt), etc.
Lining material
Optional types: Chloroprene rubber, polyurethane rubber, polytetrafluoroethylene (PTFE), F46, PFA, etc.
Power Supply and Output
Power Supply: 100~240V AC, 12V/24V DC, Battery or Solar Power Supply
Signal output: 4-20mA DC, frequency/pulse, relay output
Communication Protocol
Supported: RS485/RS232 (Modbus protocol), HART, Profibus-DP/PA
Installation and Protection
Connection methods: Flange, clamp type, thread, clamp ring
Protection level: IP65 (for integrated type), IP67/IP68 (for split-type sensors)
Application scenario
Suitable for precise measurement of liquid flow in complex working conditions with high requirements, such as industrial wastewater and chemical liquids.
Specifications:
| Standard accuracy | ±0.5% |
| Low flow rate characteristic | with high stability |
| Electrical conductivity | ≥ 5 μs/cm |
| Integrated/Discrete type | DN10 - DN500mm Electrode material |
Product Tags:
|
|
YJJ MF5806E1 Flow Sensor Is Used In Medical Oxygen Supply Systems Images
|
